跳转到主内容
  1. Shoe polish can be used to visualize the scratches. Rub a small amount of dark shoe polish over the scratch.
    • Shoe polish can be used to visualize the scratches. Rub a small amount of dark shoe polish over the scratch.

  2. Wipe the shoe polish over the panel. This fills the scratches with polish.
    • Wipe the shoe polish over the panel. This fills the scratches with polish.

  3. Block sand the panel with 2000-grit wet/dry sandpaper and plenty of water. Sand until the shoe polish disappears.
    • Block sand the panel with 2000-grit wet/dry sandpaper and plenty of water. Sand until the shoe polish disappears.

  4. Polish out the sanding scratches with rubbing compound.
    • Polish out the sanding scratches with rubbing compound.

  5. A polishing wheel makes short work of bringing the shine back. An oscillating polisher is less aggressive than this rotary polisher.
    • A polishing wheel makes short work of bringing the shine back. An oscillating polisher is less aggressive than this rotary polisher.

    • Don't buff through the paint into the next layer, especially on high-crown or sharp edges.

  6. Finish with light hand buffing to remove the last of the compound. Follow with car wax.
    • Finish with light hand buffing to remove the last of the compound. Follow with car wax.

终点

17等其他人完成本指南。

Brian Sallee

于2012年03月07日注册

1,760 信誉积分

撰写一个指南

团队

iFixit iFixit 的会员

Community

104 名成员

创作了9,208篇指南

Don’t you need to put the clear coat on the paint before waxing?

Richard E Riman - 回复

添加评论

浏览统计数据:

过去的24小时: 5

过去的7天: 14

过去的30天: 72

总计 7,894