跳转到主内容

How to Re-caulk a Bathroom

已存档的指南
本指南只作为历史记录保留。请使用指南的最新版本来进行维修。

你所需要的

  1. How to Re-caulk a Bathroom, How to Re-caulk a Bathroom: 步骤 1 中的图像 1,1
    • Use a knife to uproot the old caulk that is sealed to the wall.

  2. How to Re-caulk a Bathroom: 步骤 2 中的图像 1,1
    • Peel off until all of the caulk is removed.

  3. How to Re-caulk a Bathroom: 步骤 3 中的图像 1,1
    • Remove all of the residual caulk that lies under the main slabs that were just pulled off.

    • Do this by angling the tip of the blade into the pivot and scraping up the caulk that lies there.

  4. How to Re-caulk a Bathroom: 步骤 4 中的图像 1,3 How to Re-caulk a Bathroom: 步骤 4 中的图像 2,3 How to Re-caulk a Bathroom: 步骤 4 中的图像 3,3
    • Before applying the new caulk, clean the area with hydrogen peroxide or rubbing alcohol.

    • Let the area dry for about 10 minutes before applying the new caulk. This will allow the new caulk to seal properly.

  5. How to Re-caulk a Bathroom: 步骤 5 中的图像 1,2 How to Re-caulk a Bathroom: 步骤 5 中的图像 2,2
    • Place the tip of the new bottle of caulk into the hole by the trigger.

    • Squeeze the trigger to cut.

  6. How to Re-caulk a Bathroom: 步骤 6 中的图像 1,2 How to Re-caulk a Bathroom: 步骤 6 中的图像 2,2
    • Use something sharp to break the inner seal of the caulk.

    • The use of the pin on the caulking gun (as shown in the 2nd picture) is an alternative to using a blade.

  7. How to Re-caulk a Bathroom: 步骤 7 中的图像 1,2 How to Re-caulk a Bathroom: 步骤 7 中的图像 2,2
    • Push the silver button and pull the spring back to fully open the chamber of the caulking gun.

    • Place the new bottle of caulk into the open chamber.

  8. How to Re-caulk a Bathroom: 步骤 8 中的图像 1,2 How to Re-caulk a Bathroom: 步骤 8 中的图像 2,2
    • To apply the new caulk, press the trigger and drag the gun across the area being re-caulked.

    • When caulking the area, try to use the appropriate amount of caulk. More is better than less.

  9. How to Re-caulk a Bathroom: 步骤 9 中的图像 1,3 How to Re-caulk a Bathroom: 步骤 9 中的图像 2,3 How to Re-caulk a Bathroom: 步骤 9 中的图像 3,3
    • After applying the new caulk, dab a finger in water and smooth it out.

    • The more times you smooth it out, the more caulk you take off. This is why using more is better than using less.

    • It takes 24 hours for new caulking to dry. DO NOT get the surface wet during this time. It will ruin your work.

结论

By using these tools and referring to this guide, you can re-caulk any part of your bathroom with relative ease.

5等其他人完成本指南。

团队

Cal Poly, Team 10-2, Green Fall 2015 Cal Poly, Team 10-2, Green Fall 2015 的会员

CPSU-GREEN-F15S10G2

3 名成员

创作了3篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 523