修复你的物品 社区 商店

How to Position a Vernier Caliper

简介

These instructions will cover the techniques for measuring external & internal features, as well as heights and depths.

你所需要的

  1. How to Position a Vernier Caliper, Good Practice: 步骤 1 中的图像 1，2 How to Position a Vernier Caliper, Good Practice: 步骤 1 中的图像 2，2

    • Use the metal wheel contacting the measured surfaces.

    • This will allow for a more repeatable measurement.

    • Extend the calibration life of the device. Preventing damage to the measuring surfaces or measured part.

    • Make use of the locking mechanism.

    • Occasionally the device has to be positioned in a way that cannot be read.

    • Always prioritize comfort. If there is a change the jaws can move when attempting to read. Lock the device. Move it to you.

    • Ensure the part is secure, use flat surfaces, try to use the vernier comfortably with both hands.

    编辑

  2. How to Position a Vernier Caliper, External Feature: 步骤 2 中的图像 1，3 How to Position a Vernier Caliper, External Feature: 步骤 2 中的图像 2，3 How to Position a Vernier Caliper, External Feature: 步骤 2 中的图像 3，3

    • External features are measured as shown.

    • These sections of the jaws have a knife edge,

    • Used to measure smaller features with low clearances.

    • These sections have a flat edge.

    • Used to measure larger features with perpendicular surfaces.

    编辑

  4. How to Position a Vernier Caliper, Internal Feature: 步骤 3 中的图像 1，1

    • Internal features are measured as shown.

    编辑

  5. How to Position a Vernier Caliper, Height: 步骤 4 中的图像 1，3 How to Position a Vernier Caliper, Height: 步骤 4 中的图像 2，3 How to Position a Vernier Caliper, Height: 步骤 4 中的图像 3，3

    • Heights of steps are measured as shown.

    • Butt the head of the caliper against one surface.

    • Butt the head of the slider against the other surface.

    编辑

  6. How to Position a Vernier Caliper, Depth: 步骤 5 中的图像 1，2 How to Position a Vernier Caliper, Depth: 步骤 5 中的图像 2，2

    • Depth of holes are measured as shown.

    • Position the blade to the center of the hole.

    • Hold the end of the caliper flush the surface of the hole.

    • Extend the slider until the blade bottoms out the hole.

    编辑
结论

Happy Measuring

5等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 6

过去 30 天： 18

总计 1,525