跳转到主内容

How to Mend Broken China

你所需要的

  1. How to Mend Broken China, How to Mend Broken China: 步骤 1 中的图像 1,1
    • Wipe all broken edges with rubbing alcohol using a paper towel.

    • Do this to eliminate any grease and dirt.

    • Be aware that rubbing alcohol is highly flammable.

    • Be aware of sharp edges throughout this repair.

  2. How to Mend Broken China: 步骤 2 中的图像 1,1
    • Pour epoxy into a smooth-surfaced container.

    • We used the plastic wrapping of the razor, but any container works.

    • Don't use epoxy in a small, confined space.

    • Do not get epoxy near eyes or on skin. Consider using polyethylene or polypropylene gloves.

  3. How to Mend Broken China: 步骤 3 中的图像 1,1
    • Mix epoxy fluids with a toothpick.

    • The fluid sets in 5 minutes, so you must quickly apply it to the china. You can mix more if the first pour hardens.

  4. How to Mend Broken China: 步骤 4 中的图像 1,2 How to Mend Broken China: 步骤 4 中的图像 2,2
    • Apply the epoxy along the edges of the base piece of china and first chipped piece of china using the toothpick.

  5. How to Mend Broken China: 步骤 5 中的图像 1,3 How to Mend Broken China: 步骤 5 中的图像 2,3 How to Mend Broken China: 步骤 5 中的图像 3,3
    • Attach the first detached piece to the base carefully by hand.

    • Adjust as needed.

    • Don't worry about excess epoxy at this point. It will be removed after setting.

  6. How to Mend Broken China: 步骤 6 中的图像 1,2 How to Mend Broken China: 步骤 6 中的图像 2,2
    • Apply epoxy on the next detached piece and the already mended piece

    • Use a tweezer to attach smaller fragments.

  7. How to Mend Broken China: 步骤 7 中的图像 1,2 How to Mend Broken China: 步骤 7 中的图像 2,2
    • Attach the piece to the china.

    • Adjust as needed

    • Repeat the process of applying epoxy and attaching the chips until all broken pieces are successfully in place.

  8. How to Mend Broken China: 步骤 8 中的图像 1,1
    • Place mended china in a container of stabilizing sand or gravel.

    • This step is performed to put the right gravitational weight on the attachments so the pieces don't become unaligned during the setting of the epoxy.

    • Leave to set for at least 1 hour.

  9. How to Mend Broken China: 步骤 9 中的图像 1,2 How to Mend Broken China: 步骤 9 中的图像 2,2
    • Shave off as much excess epoxy as possible using the razor.

    • Exhibit caution when using the razors; they are very sharp!

  10. How to Mend Broken China: 步骤 10 中的图像 1,2 How to Mend Broken China: 步骤 10 中的图像 2,2
    • Use coarse sandpaper to further reduce the excess epoxy.

  11. How to Mend Broken China: 步骤 11 中的图像 1,1
    • Use fine sandpaper to smooth out remaining inconsistencies.

  12. How to Mend Broken China: 步骤 12 中的图像 1,2 How to Mend Broken China: 步骤 12 中的图像 2,2
    • Darker cracks form where the clear epoxy functions as filler, but the cup will work perfectly fine! Add colored pigment to the epoxy for a more subtle repair.

终点

3等其他人完成本指南。

团队

UC Davis, Team S1-G4, Coad Spring 2017 UC Davis, Team S1-G4, Coad Spring 2017 的会员

UCD-COAD-S17S1G4

3 名成员

创作了2篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 12

过去 7 天: 43

过去 30 天: 222

总计 19,746