How to Get Dents Out of Wood - iFixit 维修指南

加入维修社区 - 创建账户

简介

Today wood is expensive, so replacing dented or damaged wood can get extremely costly. Wooden counters and tabletops can be dented by everyday wear and tear. This step-by-step guide will teach you how to properly get dents out of wooden surfaces using just a household flat iron and a wet hand towel. Be sure to know how your own household flat iron operates to avoid injury.

你所需要的

1. 步骤 1 How to Get Dents Out of Wood
  Fill a medium-sized bowl with room-temperature water.
  
  Dip a hand towel into the bowl of water.
  
  Wring the hand towel out a bit until it is damp rather than dripping wet.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 2
  In the wood surface, find the dent you wish to remove.
  
  Place the damp hand towel over the dented area as flat as possible.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
4. 步骤 3
  Set your flat iron to its highest setting.
  
  Do NOT touch the metal part of the flat iron while it is on.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
5. 步骤 4
  Firmly press the flat iron down on the damp hand towel.
  
  While pressing down, move the iron in circular or back and forth motions.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
6. 步骤 5
  Continue the circular or back and forth motions until the hand towel is dry.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
7. 步骤 6
  Repeat steps 1-5 until the dent is gone.
  
  Turn off the flat iron after finishing.
  
  Be sure to allow time for the iron to cool down after turning it off. Do NOT touch the metal or place it face down during this time.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024

结论

To reassemble your device, follow these instructions in reverse order.

取消：我没有完成这个指南。

2等其他人完成本指南。

作者

与1其他贡献者

Matthew Clarke

于01/26/23注册

187 声望

撰写一个指南

+ 2更多徽章

团队

UC Davis, Team 1-12, Morris Winter 2023 UC Davis, Team 1-12, Morris Winter 2023 的会员

UCD-MORRIS-W23S1G12

3 名成员

创作了12篇指南

0指南评论

浏览统计数据:

过去 24 小时： 7

过去 7 天： 16

过去 30 天： 130

总计 2,080