How to Fix a Faulty Button on a Mayflash F300

简介

This guide will walk you through how you can fix a faulty button on a Mayflash F300 arcade stick.

Oftentimes, buttons on arcade sticks can get finicky and unresponsive after months or years of use. This is because of things like dust and dirt, which slowly gather underneath the buttons as time goes on. That is why it is important to clean them every once in a while, so that the buttons can function without any issues.

Make sure to have the Mayflash F300 unplugged before beginning this guide.

你所需要的

步骤 1 How to Fix a Faulty Button on a Mayflash F300

How to Fix a Faulty Button on a Mayflash F300, How to Fix a Faulty Button on a Mayflash F300: 步骤 1 中的图像 1，2

How to Fix a Faulty Button on a Mayflash F300, How to Fix a Faulty Button on a Mayflash F300: 步骤 1 中的图像 2，2

Flip around the Mayflash F300, so that the metal panel is facing you.
It may be helpful to place the device on a box if you cannot hold it, as the joystick would otherwise be under pressure.

编辑

步骤 2

How to Fix a Faulty Button on a Mayflash F300: 步骤 2 中的图像 3，3

Unscrew the six 9 mm Phillips #00 screws that hold together the metal panel.
Gently pry the panel away once it is unscrewed.

编辑

步骤 3

Unplug the two cables going into the button you wish to clean or replace.
These two cables can be quite stubborn to remove, so gently wiggling them as you pull will make it easier.

编辑

步骤 4

Squeeze the two tabs that are on either side of the button and push it out.

编辑

步骤 5

Grab your toothbrush and clean out all the dirt you may find inside and around the button.
Alternatively, if you wish to install an entirely new button, you can simply set aside the old one.

编辑