跳转到主内容

简介

This guide will thoroughly explain how to easily repair a zipper that is broken. No special requirements needed; just needle-nose pliers, scissors, and a needle and thread!

  1. Take the needle nose pliers and remove the metal or plastic stopper at the end of the zipper. Zip the zipper all the way down to the last set of teeth. Zip the zipper all the way down to the last set of teeth.
    • Take the needle nose pliers and remove the metal or plastic stopper at the end of the zipper.

    • Zip the zipper all the way down to the last set of teeth.

  2. Align both sides of the zipper evenly and slip the zipper back on track. Align both sides of the zipper evenly and slip the zipper back on track. Align both sides of the zipper evenly and slip the zipper back on track.
    • Align both sides of the zipper evenly and slip the zipper back on track.

  3. Start zipping up the zipper to make sure it has been aligned properly. Start zipping up the zipper to make sure it has been aligned properly. Start zipping up the zipper to make sure it has been aligned properly.
    • Start zipping up the zipper to make sure it has been aligned properly.

  4. Android 维修工具包

    A new screen or battery is one kit away.

    现在开始购物

    Android 维修工具包

    A new screen or battery is one kit away.

    现在开始购物
  5. Thread the needle. Sew up the area where the metal or plastic stopper used to reside. Sew up the area where the metal or plastic stopper used to reside.
    • Thread the needle.

    • Sew up the area where the metal or plastic stopper used to reside.

  6. Tie off what has been sewn by making a knot in the thread. Tie off what has been sewn by making a knot in the thread. Tie off what has been sewn by making a knot in the thread.
    • Tie off what has been sewn by making a knot in the thread.

  7. Take the scissors and cut off the access thread. Get as close to the knot as you can without cutting it off. Take the scissors and cut off the access thread. Get as close to the knot as you can without cutting it off.
    • Take the scissors and cut off the access thread. Get as close to the knot as you can without cutting it off.

  8. Zip up the garmet to make sure everything is working properly. Zip up the garmet to make sure everything is working properly. Zip up the garmet to make sure everything is working properly.
    • Zip up the garmet to make sure everything is working properly.

结论

To reassemble your device, follow these instructions in reverse order.

9等其他人完成本指南。

Katalina Holbrook

于2017年06月02日注册

470 信誉积分

撰写一个指南

Not helpful. Suppose if the slider part broke and is now now. Now what?

Walter Nagel - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 10

过去的30天: 37

总计 1,440