How to Fix a BIC Wite-Out Mini

简介

If your BIC Wite-Out Mini is jammed or dismantled, little to no white-out strips will come out. Use this guide to fix the BIC Wite-Out Mini back to working order.

The white-out strip within the correction device transmits white-out strips onto paper to cover up mistakes or marks. A tangled or jammed white-out strip will not run smoothly through the gears onto paper.

This may cause headaches and inconsistencies when covering up mistakes. Fortunately, fixing a white-out strip often takes little time, and helps prevent unnecessary waste from ending up in landfills. You’ll need tweezers and a set of steady hands and you’ll be back to covering up mistakes in no time.

This guide will cover the fixing and assembly of a BIC Wite-Out Mini.

你所需要的

步骤 1 How to Fix a BIC Wite-Out Mini

How to Fix a BIC Wite-Out Mini, How to Fix a BIC Wite-Out Mini: 步骤 1 中的图像 1，1

Place the dispenser component with the logo facing down, with other components laid out on a clean, flat surface.

编辑

步骤 2

Stabilize the small gear with tweezers to prevent further unwinding.

编辑

步骤 3

How to Fix a BIC Wite-Out Mini: 步骤 3 中的图像 3，3

Untangle the plastic strip by rotating the large gear in a circular motion, going in the opposite direction of the spiral.
Stop once the plastic strip connecting the gears is straight.

编辑

步骤 4

How to Fix a BIC Wite-Out Mini: 步骤 4 中的图像 3，3

Feed the plastic strip into the small gear until the white-out strip is visible.
Turn the big gear toward the small gear until they are close to each other.

编辑