简介

This guide will show you how to replace your old indoor doorknob and assemble a new doorknob. You will need a Phillips head screwdriver as well as a new indoor doorknob set. Both can be bought from any hardware store.

  1. Parts: (in order from left to right)
    • Parts: (in order from left to right)

    • Short Screws

    • Latch mechanism with latch face

    • Long screws

    • Door knob with peg and screw holes (inside of the room)

    • Door knob with screw holes (outside of the room)

  2. Face the inside of the knob, you should see two Phillips head screws on either side of the central knob.
    • Face the inside of the knob, you should see two Phillips head screws on either side of the central knob.

  3. Unscrew both long screws.
    • Unscrew both long screws.

  4. Remove the door knob on both sides of the door.
    • Remove the door knob on both sides of the door.

  5. You will see the latch face plate (the rectangular piece of metal) where the latch of the door knob is located.
    • You will see the latch face plate (the rectangular piece of metal) where the latch of the door knob is located.

  6. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  7. Unscrew the two short screws on the latch face plate.
    • Unscrew the two short screws on the latch face plate.

  8. Remove the latch face plate and latch mechanism.
    • Remove the latch face plate and latch mechanism.

  9. Push the new latch mechanism with latch face plate into the door.
    • Push the new latch mechanism with latch face plate into the door.

    • The slanted side of the latch mechanism will be facing the direction that the door closes.

  10. Screw in both short screws of the latch face plate.
    • Screw in both short screws of the latch face plate.

  11. Insert the door knob that goes on the inside of the room, aligning the peg and screw holes with the threaded cylinders of the latch mechanism.
    • Insert the door knob that goes on the inside of the room, aligning the peg and screw holes with the threaded cylinders of the latch mechanism.

  12. Align the door knob that goes on the outside of the room, aligning the peg and screw holes with the threaded cylinders of the latch mechanism.
    • Align the door knob that goes on the outside of the room, aligning the peg and screw holes with the threaded cylinders of the latch mechanism.

  13. Screw in both long screws on both sides of the door knob.
    • Screw in both long screws on both sides of the door knob.

  14. Turn the door knob to test your work.
    • Turn the door knob to test your work.

结论

To put the old door knob back on or to change to a different door knob repeat steps from the beginning.

5等其他人完成本指南。

Mallory

于2015年02月19日注册

205 信誉积分

撰写一个指南

团队

CSU Stanislaus, Team 1-1, Moberly Spring 2015 CSU Stanislaus, Team 1-1, Moberly Spring 2015 的会员

CSUS-MOBERLY-S15S1G1

4 名成员

创作了1篇指南

This is a great guide for anyone trying to change their indoor door handle. I also recommend people research the type of door handle they’re looking to replace, sometimes people think because the knob itself looks the same as their previous one, it will have the same fitting mechanisms, when sometimes this isn’t the case.

Craig Testerson - 回复

添加评论

浏览统计数据:

过去的24小时: 4

过去的7天: 7

过去的30天: 33

总计 2,470