跳转到主内容

简介

After years of use, you might need to replace the Klickfix mounting plate on your Aqua Box. It just takes a few steps—read on to find out how.

  1. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver.
    • Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver.

  2. Replace the defective plate with the new plate.
    • Replace the defective plate with the new plate.

结论

To finish the repair follow the instructions in reverse order.

特别感谢这些译者︰

de en

100%

这些翻译人员帮助我们修复这个世界! 想要作出贡献?
开始翻译 ›

VAUDE Reparaturteam

于2016年02月22日注册

5,835 信誉积分

创作了32篇指南

团队

Vaudesport Vaudesport 的会员

Community

3 名成员

创作了91篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 11

过去的30天: 34

总计 1,058