跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

Shock cords hold the segments of a tent pole together making tent set up faster. Over the years, the cord can become brittle and break. We’ll show you step by step instructions for removing the old shock cord and replacing it with a new one.

  1. First, check if you really need to replace the cord. The following criteria can be helpful in your decision: cord has lost, elasticity, rough surfaces.     damaged areas
    • First, check if you really need to replace the cord. The following criteria can be helpful in your decision: cord has lost, elasticity, rough surfaces. damaged areas

    • Put all segments together so that you have one long tent pole.

  2. Pull out the end pin on one side and cut off the knot. Then pull the shock cord out completely from the other end of the pole. Pull out the end pin on one side and cut off the knot. Then pull the shock cord out completely from the other end of the pole. Pull out the end pin on one side and cut off the knot. Then pull the shock cord out completely from the other end of the pole.
    • Pull out the end pin on one side and cut off the knot. Then pull the shock cord out completely from the other end of the pole.

  3. 任天堂 Switch 套装

    A quick fix to get back in the game

    Shop Switch Kits

    任天堂 Switch 套装

    A quick fix to get back in the game

    Shop Switch Kits
  4. Attach the new shock cord to the pin and tie a knot in it.
    • Attach the new shock cord to the pin and tie a knot in it.

  5. Thread the loose shock cord end through the tent pole.
    • Thread the loose shock cord end through the tent pole.

  6. When the shock cord is hanging out of the tent pole with a fair amount of excess, insert the pin back into the pole at the other end.
    • When the shock cord is hanging out of the tent pole with a fair amount of excess, insert the pin back into the pole at the other end.

  7. At the other end, pull the shock cord taught  – with about one arm’s length of tension in the cord.
    • At the other end, pull the shock cord taught – with about one arm’s length of tension in the cord.

    • In order to keep this tension for the next step, hold the shock cord to the pole with your fingers.

    • Hold the shock cord and tension with the help of a clothes pin.

    • Now attach the end pin to this side of the shock cord, tie a knot in it, and insert it into the pole.

结论

Done! You made it.

特别感谢这些译者︰

100%

VAUDE Reparaturteam正在帮助我们修复这个世界! 想要作出贡献?
开始翻译 ›

VAUDE Reparaturteam

于2016年02月22日注册

5,517 信誉积分

创作了31篇指南

团队

Vaudesport Vaudesport 的会员

Community

3 名成员

创作了62篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 5

总计 337