跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

Hover-1 Titan Power Button Replacement

你所需要的

  1. Hover-1 Titan Power Button Replacement, Bottom Right Panel: 步骤 1 中的图像 1,2 Hover-1 Titan Power Button Replacement, Bottom Right Panel: 步骤 1 中的图像 2,2
    • Flip the hoverboard so the bottom is facing up.

    • The right side is the side that has the power button. There is also an "R" on the metal plate underneath the battery.

  2. Hover-1 Titan Power Button Replacement: 步骤 2 中的图像 1,2 Hover-1 Titan Power Button Replacement: 步骤 2 中的图像 2,2
    • Using a Phillips #1 screwdriver, remove the two 14 mm screws closest to the center of the hoverboard.

    • Using a Phillips #1 screwdriver, remove the four 12 mm screws located in the middle of the panel.

    • Using a Phillips #1 screwdriver, remove the two 15 mm screws located closest to the wheel.

  3. Hover-1 Titan Power Button Replacement: 步骤 3 中的图像 1,3 Hover-1 Titan Power Button Replacement: 步骤 3 中的图像 2,3 Hover-1 Titan Power Button Replacement: 步骤 3 中的图像 3,3
    • Grip the bottom right panel and lift to remove it.

  4. Hover-1 Titan Power Button Replacement, Power Button: 步骤 4 中的图像 1,2 Hover-1 Titan Power Button Replacement, Power Button: 步骤 4 中的图像 2,2
    • Disconnect the battery by holding the yellow connectors and pulling apart.

  5. Hover-1 Titan Power Button Replacement: 步骤 5 中的图像 1,3 Hover-1 Titan Power Button Replacement: 步骤 5 中的图像 2,3 Hover-1 Titan Power Button Replacement: 步骤 5 中的图像 3,3
    • Unplug the red and black power button connector on the motherboard by squeezing the connector and pulling away from the board.

    • You can also unplug the light connector to free up your work space.

  6. Hover-1 Titan Power Button Replacement: 步骤 6 中的图像 1,2 Hover-1 Titan Power Button Replacement: 步骤 6 中的图像 2,2
    • Use an adjustable wrench to remove the 14 mm nut holding the button in the shell.

  7. Hover-1 Titan Power Button Replacement: 步骤 7 中的图像 1,3 Hover-1 Titan Power Button Replacement: 步骤 7 中的图像 2,3 Hover-1 Titan Power Button Replacement: 步骤 7 中的图像 3,3
    • Pull the power button out of the panel.

    • Replace the power button.

结论

To reassemble your device, follow these instructions in reverse order.

Alexander Pham

于10/07/18注册

221 声望

撰写一个指南

团队

Cal Poly, Team S15-G4, White Fall 2018 Cal Poly, Team S15-G4, White Fall 2018 的会员

CPSU-WHITE-F18S15G4

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 1

过去 30 天: 8

总计 515