修复你的物品 社区 商店

Hover-1 Superstar Front Bumper LED Replacement

简介

Often times the lights on the Hover-1 Superstar stop working and need to be replaced. This guide will explain the short series of steps involved in fixing issues with the lights on the device.

你所需要的

  1. Hover-1 Superstar Front Bumper LED Replacement, Bottom Case: 步骤 1 中的图像 1，3 Hover-1 Superstar Front Bumper LED Replacement, Bottom Case: 步骤 1 中的图像 2，3 Hover-1 Superstar Front Bumper LED Replacement, Bottom Case: 步骤 1 中的图像 3，3

    • Flip your Hover-1 Superstar device upside down.

    • Using a Phillips #1 screwdriver, remove all twenty of the 18mm screws holding the case onto the device.

    • Remove the bottom case. Be careful of the connector holding the case and the device together.

    编辑

  3. Hover-1 Superstar Front Bumper LED Replacement: 步骤 2 中的图像 1，1

    • Locate the cable connected to the front lights.

    • Pull apart the wires until the black clip separates.

    编辑

  4. Hover-1 Superstar Front Bumper LED Replacement, Front Bumper LED: 步骤 3 中的图像 1，1

    • Grab the wire of the connector you disconnected from the case earlier and slide the entire light out away from the case.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 273