跳转到主内容

简介

To access the internal components of the hoverboard, the base plate must be removed. This guide will show you how to remove the base plate of your Hover-1 Horizon.

  1. Remove the six 12mm Phillips #2 screws holding the base plate. Remove the six 12mm Phillips #2 screws holding the base plate.
    • Remove the six 12mm Phillips #2 screws holding the base plate.

  2. Apple Watch 套装

    Screen and battery repairs just got easier.

    现在开始购物

    Apple Watch 套装

    Screen and battery repairs just got easier.

    现在开始购物
  3. Remove the two 11mm Phillips #1 screws that hold the base plate to the body. Remove the two 11mm Phillips #1 screws that hold the base plate to the body.
    • Remove the two 11mm Phillips #1 screws that hold the base plate to the body.

  4. Remove the base plate by lifting it up. The base plate is connected to the body with wires. The wires are long enough to set the base plate to the side. The base plate is connected to the body with wires. The wires are long enough to set the base plate to the side.
    • Remove the base plate by lifting it up.

    • The base plate is connected to the body with wires. The wires are long enough to set the base plate to the side.

结论

To reassemble your device, follow these instructions in reverse order.

Jenny Dyer

于2018年10月08日注册

232 信誉积分

创作了2篇指南

团队

Cal Poly, Team S13-G6, White Fall 2018 Cal Poly, Team S13-G6, White Fall 2018 的会员

CPSU-WHITE-F18S13G6

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 24