修复你的物品 社区 商店

Hover-1 Folding E-Scooter Rear Wheel Replacement

简介

This guide is created to replace a damaged or broken back wheel. Tools required are a Hex Bit 4.0 tool, a bit extender, and an allen key.

你所需要的

  1. Hover-1 Folding E-Scooter Rear Wheel Replacement, Rear Wheel: 步骤 1 中的图像 1，2 Hover-1 Folding E-Scooter Rear Wheel Replacement, Rear Wheel: 步骤 1 中的图像 2，2

    • Remove either of the two 0.2 mm axle screws by using a hex bit 4.0 by turning clockwise.

    • The two screws are the same thread so find the screw that has the least torque. Only that screw will be able to removed in this step.

    • Turn the hex bit 4.0 counterclockwise to reassemble the axle screws.

    编辑

  2. Hover-1 Folding E-Scooter Rear Wheel Replacement: 步骤 2 中的图像 1，3 Hover-1 Folding E-Scooter Rear Wheel Replacement: 步骤 2 中的图像 2，3 Hover-1 Folding E-Scooter Rear Wheel Replacement: 步骤 2 中的图像 3，3

    • Slide off the plastic side panel.

    编辑

  4. Hover-1 Folding E-Scooter Rear Wheel Replacement: 步骤 3 中的图像 1，1

    • Use a hex bit 4.0 to screw back in the 0.2 mm screw as tightly as possible by turning clockwise.

    • You will need to hold the other screw you are not replacing with an additional hex bit 4.0, so that the screws don't spin freely.

    编辑

  5. Hover-1 Folding E-Scooter Rear Wheel Replacement: 步骤 4 中的图像 1，1

    • Flip over the scooter and use the hex bit 4.0 to remove the other 0.2 mm screw.

    编辑

  6. Hover-1 Folding E-Scooter Rear Wheel Replacement: 步骤 5 中的图像 1，3 Hover-1 Folding E-Scooter Rear Wheel Replacement: 步骤 5 中的图像 2，3 Hover-1 Folding E-Scooter Rear Wheel Replacement: 步骤 5 中的图像 3，3

    • Slide off the other plastic side panel.

    编辑

  7. Hover-1 Folding E-Scooter Rear Wheel Replacement: 步骤 6 中的图像 1，1

    • On the same side you removed the screw, use the bit extender to push down on the axle inside the wheel.

    • The axle pops out and the wheel easily comes off.

    • Two washers will pop out with the axle.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Luke Imai

于10/08/18注册

133 声望

撰写一个指南

徽章: 2

团队

Cal Poly, Team S15-G5, White Fall 2018 Cal Poly, Team S15-G5, White Fall 2018 的会员

CPSU-WHITE-F18S15G5

4 名成员

创作了5篇指南

2条评论

Where can you get replacement rubber for the front and rear wheels?

jackricotta - 回复

How about adding a rear wheel removal article for the Hover-1 Alpha folding scooter?

sfaheysd - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 12

过去 30 天： 37

总计 5,157