Hover-1 Folding E-Scooter Brake Switch Replacement

简介

This guide is designed to help you replace a broken or damaged brake switch. All you will need is a #0 and #2 Phillips screwdriver to remove the screws in this guide

你所需要的

步骤 1 Brake Switch

Hover-1 Folding E-Scooter Brake Switch Replacement, Brake Switch: 步骤 1 中的图像 1，1

Twist the handle with the red level counterclockwise to remove it from the scooter's main body.
You will need to twist the handle clockwise reattach it to the scooter's main body.

编辑

步骤 2

Remove the four 5 mm screws twisting counterclockwise with a Phillips #0 screwdriver.
These screws are small and easy to lose.
When inserting for reassembly the screws twist clockwise to secure.

编辑

步骤 3

Hover-1 Folding E-Scooter Brake Switch Replacement: 步骤 3 中的图像 3，3

Remove the red brake switch by sliding it off the main body.
When putting the brake switch back make sure to align the tab with the throttle switch.

编辑

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与1其他贡献者

团队

Cal Poly, Team S15-G5, White Fall 2018 Cal Poly, Team S15-G5, White Fall 2018 的会员

CPSU-WHITE-F18S15G5

4 名成员

创作了5篇指南

6条评论

Do you know where I can find just the handle? They sent me a L and R but the L was stripped and won't screw in and the R will screw into both sides so I need either a L or R at this point I don't care i just can't find one and its “out of warranty”

Angela Renteria - 2020年5月13日回复