修复你的物品 社区 商店

Hover-1 Coast Wheel Replacement

简介

If you are ever in the situation where any of your Coast wheels are needed to be replaced don't hesitate replacing them. This does not require any difficult steps but it is important for your safety along with others around you.

你所需要的

  1. Hover-1 Coast Wheel Replacement, Wheel: 步骤 1 中的图像 1，1

    • Identify the wheel you are wanting to replace.

    编辑

  2. Hover-1 Coast Wheel Replacement: 步骤 2 中的图像 1，2 Hover-1 Coast Wheel Replacement: 步骤 2 中的图像 2，2

    • Find the Socket wrench located in the Hover-1 Coast packaging.

    • Use the 9/16 inch side to loosen the skateboard nut by turning counterclockwise.

    编辑

  4. Hover-1 Coast Wheel Replacement: 步骤 3 中的图像 1，3 Hover-1 Coast Wheel Replacement: 步骤 3 中的图像 2，3 Hover-1 Coast Wheel Replacement: 步骤 3 中的图像 3，3

    • Remove the nut off the axle.

    • Remove the washer off the axle.

    编辑

  5. Hover-1 Coast Wheel Replacement: 步骤 4 中的图像 1，3 Hover-1 Coast Wheel Replacement: 步骤 4 中的图像 2，3 Hover-1 Coast Wheel Replacement: 步骤 4 中的图像 3，3

    • To avoid losing any parts, place them on a flat surface.

    • Slide the unwanted wheel off the axle.

    • Slide the new wheel on the axle.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 2

总计 409