修复你的物品 社区 商店

Hot Tools HPK12 Heating Plate Replacement

简介

This guide will show you how to replace the hot plates on your HPK12. Do not begin working on your device without unplugging it from the wall.

你所需要的

  1. Hot Tools HPK12 Heating Plate Replacement, Prerequisite Only: 步骤 1 中的图像 1，3 Hot Tools HPK12 Heating Plate Replacement, Prerequisite Only: 步骤 1 中的图像 2，3 Hot Tools HPK12 Heating Plate Replacement, Prerequisite Only: 步骤 1 中的图像 3，3

    • Remove round plastic cover near cord base by prying under the side with the metal spudger.

    • Flip the device and remove the other round plastic cover near the base of the cord.

    • Use the Phillips #1 screwdriver to remove the 5.5mm PH1 screw and washer under the plastic cover and set both aside.

    编辑

  2. Hot Tools HPK12 Heating Plate Replacement: 步骤 2 中的图像 1，1

    • Use the metal spudger to push the center pin through to the other side.

    编辑

  3. Hot Tools HPK12 Heating Plate Replacement: 步骤 3 中的图像 1，2 Hot Tools HPK12 Heating Plate Replacement: 步骤 3 中的图像 2，2

    • Lift back plastic cover to expose spring assembly.

    • Be careful not to damage the power cord by bending or twisting it too much while performing this step.

    • Grip the exposed end of the spring assembly and remove it.

    • The side with the two ends of the spring goes into the recessed area of the iron

    编辑

  4. Hot Tools HPK12 Heating Plate Replacement: 步骤 4 中的图像 1，1

    • Use the JIS #0 screwdriver to remove the two 3.5mm “J0” screws that attach the control assembly cover to the flat iron base.

    编辑

  6. Hot Tools HPK12 Heating Plate Replacement: 步骤 5 中的图像 1，3 Hot Tools HPK12 Heating Plate Replacement: 步骤 5 中的图像 2，3 Hot Tools HPK12 Heating Plate Replacement: 步骤 5 中的图像 3，3

    • Lift upward on the control assembly cover to remove it from the flat iron base.

    • Remove dial and switch cover and set aside.

    编辑

  7. Hot Tools HPK12 Heating Plate Replacement: 步骤 6 中的图像 1，3 Hot Tools HPK12 Heating Plate Replacement: 步骤 6 中的图像 2，3 Hot Tools HPK12 Heating Plate Replacement: 步骤 6 中的图像 3，3

    • Use your JIS #0 screw driver to remove the two 6mm “J0” screws that are attached to the flat iron base and set them aside.

    • Lift the backing plate upwards to remove it from the flat iron.

    • Use the Phillips #0 screwdriver to remove two 4mm “PH0” screws that attach the circuit assembly to the flat iron base.

    编辑

  8. Hot Tools HPK12 Heating Plate Replacement, Heating Plates: 步骤 7 中的图像 1，1

    • Lift plate and circuit assembly away from flat iron case.

    编辑

  9. Hot Tools HPK12 Heating Plate Replacement: 步骤 8 中的图像 1，1

    • Flip device to access the non-control assembly flat iron arm and remove two 3.5mm “J0” screws that attaches cover to flat iron base.

    编辑

  10. Hot Tools HPK12 Heating Plate Replacement: 步骤 9 中的图像 1，1

    • Lift cover from flat iron case.

    编辑

  11. Hot Tools HPK12 Heating Plate Replacement: 步骤 10 中的图像 1，2 Hot Tools HPK12 Heating Plate Replacement: 步骤 10 中的图像 2，2

    • Lift heating plate away from flat iron case.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与4其他贡献者

Nathan Schwartz

于10/24/16注册

318 声望

创作了2篇指南

徽章: 13

+ 10更多徽章

团队

IUPUI, Team 3-4, Baechle Fall 2016 IUPUI, Team 3-4, Baechle Fall 2016 的会员

IUPUI-BAECHLE-F16S3G4

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 847