修复你的物品 社区 商店

Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement

简介

This guide will help assist you with removing and replacing the motor assembly in your Hoover UH72400.

你所需要的

  1. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, HEPA Filter: 步骤 1 中的图像 1，2 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, HEPA Filter: 步骤 1 中的图像 2，2

    • Put the cleaner into the upright position, turn the power off, and unplug the power cord.

    编辑

  2. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: 步骤 2 中的图像 1，3 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: 步骤 2 中的图像 2，3 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: 步骤 2 中的图像 3，3

    • Remove the dirt cup from the cleaner.

    • The HEPA filter is located under the dirt cup and under where it says HEPA.

    • Twist the top counterclockwise to unlock the cap.

    编辑

  4. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: 步骤 3 中的图像 1，2 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: 步骤 3 中的图像 2，2

    • Lift the HEPA filter out.

    • Tap the filter against the inside of a trashcan to knock out the dirt and debris or replace as necessary.

    • Do not wash the HEPA Filter.

    编辑

  5. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, Motor Assembly: 步骤 4 中的图像 1，3 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, Motor Assembly: 步骤 4 中的图像 2，3 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, Motor Assembly: 步骤 4 中的图像 3，3

    • Remove the 4 retaining screws and remove the filter tray.

    • Screw lengths are approximately 3/4".

    编辑

  6. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: 步骤 5 中的图像 1，1

    • Pull the motor housing vertically to dislodge the motor.

    编辑

  7. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: 步骤 6 中的图像 1，3 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: 步骤 6 中的图像 2，3 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: 步骤 6 中的图像 3，3

    • Use a plastic spudger or opening tool to press on the small circle and wiggle clips free.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与3其他贡献者

steven hoover

于09/26/17注册

257 声望

创作了2篇指南

徽章: 6

+ 3更多徽章

团队

Cal Poly, Team S7-G2, Banghart Fall 2017 Cal Poly, Team S7-G2, Banghart Fall 2017 的会员

CPSU-BANGHART-F17S7G2

5 名成员

创作了14篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 5

过去 7 天： 16

过去 30 天： 51

总计 3,855