跳转到主内容

Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement

你所需要的

  1. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement, Primary Air Filter: 步骤 1 中的图像 1,1
    • Press button on the top of the dust cup and pull back.

    • Remove dust cup from vacuum

  2. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: 步骤 2 中的图像 1,1
    • Pull back on black lever and rotate dust cup lid back.

  3. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: 步骤 3 中的图像 1,1
    • Lift up on fabric flap to remove filter from vaccum

    • If you wish to clean the filter rather than replace it, it can be washed under a faucet.

    • If washing the filter, make sure it fully dries out before re-installing.

  4. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement, Dust Cup Assembly: 步骤 4 中的图像 1,1
    • Holding onto both the top handle and dust cup body, twist the two components apart following the instructions printed on the back.

  5. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: 步骤 5 中的图像 1,2 Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: 步骤 5 中的图像 2,2
    • Unscrew the three 4 cm Phillips #3 screws located inside the dust filter compartment to detach the dust filter system.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Chino Cruz

于01/22/18注册

135 声望

撰写一个指南

团队

Cal Poly, Team S11-G4, Banghart Winter 2018 Cal Poly, Team S11-G4, Banghart Winter 2018 的会员

CPSU-BANGHART-W18S11G4

5 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 5

过去 30 天: 48

总计 4,559