简介

This guide will help you remove the belt the drives the brush.

配件

无需配件。

  1. Place the vacuum on its back.
    • Place the vacuum on its back.

    • On the bottom right side, push the red lever to the left.

    • Remove the plastic cover.

    添加评论

  2. Grab the red switch under the brush and push left.
    • Grab the red switch under the brush and push left.

    • Then remove the plastic base plate.

    添加评论

    • Use a Phillips #1 screwdriver to remove the two screws on the right side of the brush.

    添加评论

    • Remove the two screws on the left side of the brush.

    添加评论

    • Pull the clear plastic away from the head of the vacuum.

    • Slide the belt off the metal rod with your finger.

    • Pull the brush free.

    添加评论

    • Removal of the brush will also remove the belt.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Erik Ingels

于2018年01月18日注册

193 信誉积分

创作了2篇指南

团队

Cal Poly, Team S12-G4, Banghart Winter 2018 Cal Poly, Team S12-G4, Banghart Winter 2018 的会员

CPSU-BANGHART-W18S12G4

5 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 3

总计 54