简介

This guide will show you how to open dissemble the handle and replace the motherboard. You might need to do this if the device has power but fails to turn on. Remember to remove the battery from the device.

  1. Remove the single 15mm Phillips #1 screw from the handle.
    • Remove the single 15mm Phillips #1 screw from the handle.

  2. Remove the handle by pulling it up.
    • Remove the handle by pulling it up.

  3. Remove two 15mm Phillips #1 screws from the handle.
    • Remove two 15mm Phillips #1 screws from the handle.

  4. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  5. Use a plastic opening tool to carefully pry the black cover off of the handle. Use a plastic opening tool to carefully pry the black cover off of the handle.
    • Use a plastic opening tool to carefully pry the black cover off of the handle.

  6. Remove five 15mm Phillips #1 black screws from the handle. Remove five 15mm Phillips #1 black screws from the handle.
    • Remove five 15mm Phillips #1 black screws from the handle.

  7. Remove the silver plastic cover using the plastic opening tool. Remove the silver plastic cover using the plastic opening tool.
    • Remove the silver plastic cover using the plastic opening tool.

  8. Remove the black rubber cover from the motherboard.
    • Remove the black rubber cover from the motherboard.

  9. Remove two 8mm Phillips #1 screws from the motherboard.
    • Remove two 8mm Phillips #1 screws from the motherboard.

  10. Carefully pull the motherboard out with its attached wires. Carefully pull the motherboard out with its attached wires.
    • Carefully pull the motherboard out with its attached wires.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Sara Vlhova

于2018年01月25日注册

496 信誉积分

创作了4篇指南

团队

USF Tampa, Team S7-G4, Passmore Spring 2018 USF Tampa, Team S7-G4, Passmore Spring 2018 的会员

USFT-PASSMORE-S18S7G4

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 10

总计 126