简介
This guide shows how to remove and replace the V-Belt on a Honda FRC800K1A Rear Tine Tiller.
你所需要的
-
-
Firmly grip the base of the connector and pull it away from the spark plug to disconnect it.
-
-
-
-
Use a 14 mm socket to remove the bolt securing the outer belt cover.
-
-
-
Push the V-belt towards the transmission pulley to release tension.
-
Slip the V-belt off of the groove in the pulley.
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.
另外一个人完成了本指南。