修复你的物品 社区 商店

Homedics UHE-CMP15 Wick Replacement

简介

If your humidifier has stopped absorbing water, you might need to replace the old wick from the humidifier with a new one. For this guide, you do not need any tools but you do need a replacement wick to place inside the lid.

  1. Homedics UHE-CMP15 Wick Replacement, Wick: 步骤 1 中的图像 1，1

    • Unscrew the top half of the device from the container and place the lid upside down.

    • The container should unscrew counter clockwise

    编辑

  2. Homedics UHE-CMP15 Wick Replacement: 步骤 2 中的图像 1，1

    • Pull the wick holder out from the bottom of the lid.

    • Grasp onto the plastic wick holder and pull upwards until it pops free.

    编辑

  4. Homedics UHE-CMP15 Wick Replacement: 步骤 3 中的图像 1，1

    • Remove the old wick from the wick holder.

    • Tilt the wick holder to the side and gently slide the wick out of its container.

    编辑

  5. Homedics UHE-CMP15 Wick Replacement: 步骤 4 中的图像 1，1

    • Place new wick into the wick holder.

    • Grab a replacement wick from the box the humidifier came in and gently slide it into the wick holder.

    编辑

  6. Homedics UHE-CMP15 Wick Replacement: 步骤 5 中的图像 1，1

    • Insert wick holder back into the lid.

    • Grab the wick holder and insert it into the lid on the end where the wick itself enters the lid and the spring side remains in the air.

    编辑
结论

To reassemble your device, screw the lid back onto the container and turn it on.

作者

与2其他贡献者

Dylan

于10/30/23注册

337 声望

创作了3篇指南

徽章: 5

+ 2更多徽章

团队

UMass Dartmouth, Team 3-6, Konn Fall 2023 UMass Dartmouth, Team 3-6, Konn Fall 2023 的会员

UMASSD-KONN-F23S3G6

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 12

总计 95