修复你的物品 社区 商店

Holmes HEH8031 Safety Weight Replacement

简介

This guide will demonstrate how to remove and replace the safety weight in the Holmes HEH8031 Heater.

你所需要的

  1. Holmes HEH8031 Safety Weight Replacement, Housing: 步骤 1 中的图像 1，1

    • Ensure the device is unplugged from the wall outlet.

    编辑

  2. Holmes HEH8031 Safety Weight Replacement: 步骤 2 中的图像 1，1

    • Remove eight 12-mm Phillips #2 screws from the back cover.

    编辑

  4. Holmes HEH8031 Safety Weight Replacement: 步骤 3 中的图像 1，2 Holmes HEH8031 Safety Weight Replacement: 步骤 3 中的图像 2，2

    • Turn heater over so the controls are facing up.

    • Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.

    • Internal wires are connected to both halves of the housing. Be careful when separating the housing.

    编辑

  5. Holmes HEH8031 Safety Weight Replacement, Circuit Board Removal: 步骤 4 中的图像 1，1

    • Remove four 12mm Phillips #2 screws from the circuit board.

    编辑

  6. Holmes HEH8031 Safety Weight Replacement, Safety Weight: 步骤 5 中的图像 1，2 Holmes HEH8031 Safety Weight Replacement, Safety Weight: 步骤 5 中的图像 2，2

    • Remove wires from safety weight, as shown.

    • Pull upward on the blue connectors.

    • If connectors are tough to remove, try wiggling while pulling upward.

    编辑

  7. Holmes HEH8031 Safety Weight Replacement: 步骤 6 中的图像 1，1

    • Unscrew the Phillips #2 10 mm screw from the safety weight on the rear housing panel.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Deanna Jack

于10/12/16注册

333 声望

创作了4篇指南

徽章: 13

+ 10更多徽章

团队

IUPUI, Team 2-1, Baechle Fall 2016 IUPUI, Team 2-1, Baechle Fall 2016 的会员

IUPUI-BAECHLE-F16S2G1

4 名成员

创作了16篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 3

总计 535