修复你的物品 社区 商店

Hipstreet Titan 2 HD Screen Replacement

简介

This guide will allow users to replace the screen components on the tablet. This is a moderately simple process. Users will need a replacement screen to complete the process.

你所需要的

  1. Hipstreet Titan 2 HD Screen Replacement, Rear Case: 步骤 1 中的图像 1，1

    • Using the PH#00 screwdriver, remove the two 0.145 inch Phillips head screws.

    • The screws are located on the bottom face of the device, near the power and volume controls.

    编辑

  2. Hipstreet Titan 2 HD Screen Replacement: 步骤 2 中的图像 1，1

    • Place the small suction cup on your screen.

    • Moisturize the bottom of the suction cup to ensure a proper seal.

    • If the screen is cracked, the suction cup may not seal correctly; too much pressure may crack or damage the screen.

    编辑

  3. Hipstreet Titan 2 HD Screen Replacement: 步骤 3 中的图像 1，1

    • Insert the plastic opening tool between the screen cover and rear cover of the tablet.

    • Grasp the small suction cup.

    编辑

  4. Hipstreet Titan 2 HD Screen Replacement: 步骤 4 中的图像 1，2 Hipstreet Titan 2 HD Screen Replacement: 步骤 4 中的图像 2，2

    • Slide the plastic opening tool along device edge to separate the screen cover from the rear cover.

    • Pull upward on the small suction cup handle while sliding the opening tool.

    • When sliding the plastic opening tool, avoid sliding the tool too far into the cover. This could damage the speaker connector on the back cover.

    编辑

  6. Hipstreet Titan 2 HD Screen Replacement: 步骤 5 中的图像 1，2 Hipstreet Titan 2 HD Screen Replacement: 步骤 5 中的图像 2，2

    • Use the plastic opening tool to remove the speaker from the rear cover.

    • The speaker is held in place with adhesive and is easily removed.

    • Do not pull on the speaker wires. This could damage the soldering connections.

    编辑

  7. Hipstreet Titan 2 HD Screen Replacement: 步骤 6 中的图像 1，1

    • Once the speaker is disconnected, the cover removal is complete.

    编辑

  8. Hipstreet Titan 2 HD Screen Replacement, Screen: 步骤 7 中的图像 1，3 Hipstreet Titan 2 HD Screen Replacement, Screen: 步骤 7 中的图像 2，3 Hipstreet Titan 2 HD Screen Replacement, Screen: 步骤 7 中的图像 3，3

    • Lift the hinges on the three ribbon connector clips and disconnect the ribbon connector.

    编辑

  9. Hipstreet Titan 2 HD Screen Replacement: 步骤 8 中的图像 1，1

    • Using the PH#00 screwdriver, remove the three 0.145 inch circuit board screws.

    编辑

  10. Hipstreet Titan 2 HD Screen Replacement: 步骤 9 中的图像 1，1

    • Remove battery, speaker and circuit board from screen.

    • Gently move circuit board assembly with speaker and battery away from device to ensure you do not damage the solder connections.

    编辑

  11. Hipstreet Titan 2 HD Screen Replacement: 步骤 10 中的图像 1，2 Hipstreet Titan 2 HD Screen Replacement: 步骤 10 中的图像 2，2

    • Use plastic opening tools to remove screen from front cover.

    • The screen is held in with plastic tabs.

    • Use of too much force on the screen may result in unwanted damage to screen.

    • To avoid damage to screen, ensure the metal screen cover does not catch on the plastic tabs.

    编辑

  12. Hipstreet Titan 2 HD Screen Replacement: 步骤 11 中的图像 1，1

    • Remove screen solder connector with solder removal tool.

    • Solder new screen wire to circuit board with soldering tool.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

作者

与5其他贡献者

Jeffrey

于03/11/15注册

766 声望

创作了5篇指南

徽章: 10

+ 7更多徽章

团队

Colorado Springs, Team 5-6, Panko Spring 2015 Colorado Springs, Team 5-6, Panko Spring 2015 的会员

UCCS-PANKO-S15S5G6

3 名成员

创作了10篇指南

2条评论

Your step 11 is irrelevant since this look like it is the wifi antenna.

The other end of this wire is not connected to the screen. I suggested removing gently the other end from the casing (it's held with adhesive) and so, no soldering at all to do.

Otherwise, great guide! Thanks!

kamen99 - 回复

OK, so I cracked my screen and I cracked it today so I went on there to do the usual, you know? Well when I turned it on, my password lock started bugging out! (I thought a was being hacked) I am worried to do this (Step - Step thing) because I am just a child (NOT A SMALL ONE DON'T REALLY WORRY!) and my parents will be disappointed in me, I got this for my birthday! But this one is a white HipStreet tablet, one of those fancy new ones, I checked it out to see if it was actually a crack so I took off my screen protector and I felt it, but no, no! It was a crack but I couldn't feel it! I thought it was REALLY in the tablet, like through the hard-drive and wires and stuff like that, please help me I don't want to get in trouble, I can't really afford another one, and my parents say "You better protect this with your entire life, because if you break this one..YOU WON'T GET ANOTHER!" (I had 2 tablets along time ago, I broke them both, OH PLEASE I WAS A SMALL CHILD!) So please help me, Thank - You!

N3rD Al3rT - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 2,969