修复你的物品 社区 商店

Hipstreet Titan 2 HD Battery Replacement

简介

Users must disassemble the front cover to replace the battery. A replacement battery will be needed. This is a difficult process for users who do not have experience with soldering connections.

你所需要的

  1. Hipstreet Titan 2 HD Battery Replacement, Rear Case: 步骤 1 中的图像 1，1

    • Using the PH#00 screwdriver, remove the two 0.145 inch Phillips head screws.

    • The screws are located on the bottom face of the device, near the power and volume controls.

    翻译

  2. Hipstreet Titan 2 HD Battery Replacement: 步骤 2 中的图像 1，1

    • Place the small suction cup on your screen.

    • Moisturize the bottom of the suction cup to ensure a proper seal.

    • If the screen is cracked, the suction cup may not seal correctly; too much pressure may crack or damage the screen.

    翻译

  3. Hipstreet Titan 2 HD Battery Replacement: 步骤 3 中的图像 1，1

    • Insert the plastic opening tool between the screen cover and rear cover of the tablet.

    • Grasp the small suction cup.

    翻译

  5. Hipstreet Titan 2 HD Battery Replacement: 步骤 4 中的图像 1，2 Hipstreet Titan 2 HD Battery Replacement: 步骤 4 中的图像 2，2

    • Slide the plastic opening tool along device edge to separate the screen cover from the rear cover.

    • Pull upward on the small suction cup handle while sliding the opening tool.

    • When sliding the plastic opening tool, avoid sliding the tool too far into the cover. This could damage the speaker connector on the back cover.

    翻译

  6. Hipstreet Titan 2 HD Battery Replacement: 步骤 5 中的图像 1，2 Hipstreet Titan 2 HD Battery Replacement: 步骤 5 中的图像 2，2

    • Use the plastic opening tool to remove the speaker from the rear cover.

    • The speaker is held in place with adhesive and is easily removed.

    • Do not pull on the speaker wires. This could damage the soldering connections.

    翻译

  7. Hipstreet Titan 2 HD Battery Replacement: 步骤 6 中的图像 1，1

    • Once the speaker is disconnected, the cover removal is complete.

    翻译

  8. Hipstreet Titan 2 HD Battery Replacement, Battery: 步骤 7 中的图像 1，2 Hipstreet Titan 2 HD Battery Replacement, Battery: 步骤 7 中的图像 2，2

    • Remove the black placement tape from the battery.

    • Find the two battery solder connections on the circuit board.

    翻译

  9. Hipstreet Titan 2 HD Battery Replacement: 步骤 8 中的图像 1，1

    • Remove the red and black battery wires from the circuit board with the solder removal tool.

    翻译

  10. Hipstreet Titan 2 HD Battery Replacement: 步骤 9 中的图像 1，1

    • Solder the new battery wire connectors to the circuit board.

    • The battery wires must be installed with the red wire on the left and black wire on the right.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与4其他贡献者

Jeffrey

于03/11/15注册

766 声望

创作了5篇指南

徽章: 10

+ 7更多徽章

团队

Colorado Springs, Team 5-6, Panko Spring 2015 Colorado Springs, Team 5-6, Panko Spring 2015 的会员

UCCS-PANKO-S15S5G6

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 3

总计 4,270