修复你的物品 社区 商店

Headphone Jack

简介

The headphone jack is located on the side of the laptop. This guide will take you through the procedure on how to remove the headphone jack from your laptop in case there is any audio issues such as sound/mic/line in not working and how to remove the headphone jack for replacement.

你所需要的

  1. Headphone Jack, Battery: 步骤 1 中的图像 1，1

    • Unplug laptop from adapter and all other devices.

    编辑

  2. Headphone Jack: 步骤 2 中的图像 1，1

    • Flip the laptop over with battery facing you.

    编辑

  3. Headphone Jack: 步骤 3 中的图像 1，2 Headphone Jack: 步骤 3 中的图像 2，2

    • Slide the battery lock on the right side open.

    • Slide the Battery release latch on the left side.

    编辑

  4. Headphone Jack: 步骤 4 中的图像 1，1

    • Pull battery out.

    编辑

  5. Headphone Jack, Keyboard: 步骤 5 中的图像 1，1

    • Remove the two 6.5mm Phillips #1 keyboard screws from bottom of laptop.

    编辑

  7. Headphone Jack: 步骤 6 中的图像 1，1

    • Push screwdriver through screw hole top pop the keyboard.

    • Make sure the screen is open.

    编辑

  8. Headphone Jack: 步骤 7 中的图像 1，1

    • Pry up the keyboard.

    • The keyboard is still attached by it's ribbon.

    编辑

  9. Headphone Jack: 步骤 8 中的图像 1，1

    • Remove keyboard wire by popping latch under blue plastic

    编辑

  10. Headphone Jack, Case: 步骤 9 中的图像 1，1

    • Using the spudger to lift up on the white tabs

    • Pull horizontally on the blue ribbon to disconnect the cables

    编辑

  11. Headphone Jack: 步骤 10 中的图像 1，1

    • Remove the five 5.5mm Phillips #1 screws from the case

    编辑

  12. Headphone Jack: 步骤 11 中的图像 1，1

    • Remove eight 6.5mm Phillips #1 screws from the back cover

    编辑

  13. Headphone Jack: 步骤 12 中的图像 1，3 Headphone Jack: 步骤 12 中的图像 2，3 Headphone Jack: 步骤 12 中的图像 3，3

    • Starting at a top corner, use the pry tool to split the case.

    • Slowly work around the case, pulling up gently to release the clips.

    编辑

  14. Headphone Jack, Headphone Jack: 步骤 13 中的图像 1，1

    • Use the spudger to lift the white tab

    • pull horizontally on the blue ribbon to disconnect the cable

    编辑

  15. Headphone Jack: 步骤 14 中的图像 1，1

    • Use plastic pry tool to lift up on headphone jack assembly

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Tyler Lirio

于02/13/18注册

93 声望

撰写一个指南

徽章: 3

团队

USF Tampa, Team S11-G2, Cheng Spring 2018 USF Tampa, Team S11-G2, Cheng Spring 2018 的会员

USFT-CHENG-S18S11G2

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 4

总计 193