跳转到主内容

Hasbro Bop-It Micro Series Speaker Replacement

你所需要的

  1. Hasbro Bop-It Micro Series Speaker Replacement, Back Case: 步骤 1 中的图像 1,1
    • Loosen the two captive 8 mm screws in the back cover using a Phillips #0 screwdriver.

  2. Hasbro Bop-It Micro Series Speaker Replacement: 步骤 2 中的图像 1,1
    • Remove the six 6 mm screws from the back cover using a Phillips #0 screwdriver.

    • When removing the final screw, hold the assembly together. There is a spring inside the device which will pop the assembly apart when all the screws are removed.

  3. Hasbro Bop-It Micro Series Speaker Replacement: 步骤 3 中的图像 1,1
    • Carefully separate the two sections, leaving them connected by the wires.

  4. Hasbro Bop-It Micro Series Speaker Replacement, Speaker: 步骤 4 中的图像 1,2 Hasbro Bop-It Micro Series Speaker Replacement, Speaker: 步骤 4 中的图像 2,2
    • Remove the (3) #3 Phillips head 6 mm screws using your Phillips #0 screwdriver, and remove the plastic with your fingers.

  5. Hasbro Bop-It Micro Series Speaker Replacement: 步骤 5 中的图像 1,1
    • De-solder the speaker from the wires. Refer to the soldering guide for instructions on how to solder

结论

Follow the steps of this guide in reverse to reassemble.

2等其他人完成本指南。

Glenn Haag

于09/29/16注册

479 声望

创作了3篇指南

团队

IUPUI, Team 3-1, Harley Fall 2016 IUPUI, Team 3-1, Harley Fall 2016 的会员

IUPUI-HARLEY-F16S3G1

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 4

过去 30 天: 22

总计 1,223