Hasbro Bop-It Micro Series Levers Replacement

简介

Use this guide to replace the levers inside the Hasbro Bop-It Micro Series game. The levers make the pull-it and twist-it handles function. When you pull or twist the handles, the levers push a sensor. The levers may be damaged if the game turns on but the handles don’t work.

Before using this guide, make sure to review the troubleshooting page.

你所需要的

步骤 1 Back Case

Hasbro Bop-It Micro Series Levers Replacement, Back Case: 步骤 1 中的图像 1，1

Loosen the two captive 8 mm screws in the back cover using a Phillips #0 screwdriver.

编辑

步骤 2

Remove the six 6 mm screws from the back cover using a Phillips #0 screwdriver.
When removing the final screw, hold the assembly together. There is a spring inside the device which will pop the assembly apart when all the screws are removed.

编辑