Hasbro Bop-It Micro Series Battery Replacement

简介

There are no previous steps needed. All that is required is a #0 Phillips Screwdriver, (2) fresh AAA batteries, and a few minutes of time.

Unscrew the (2) #4 Phillips head 8 mm screws on the back cover using a Phillips #0 screwdriver. The screws are captured and do not need to be completely removed from the back cover.

The batteries are now accessible. Remove batteries using fingers or plastic spudger.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

于09/29/16注册

139 声望

创作了2篇指南

IUPUI-HARLEY-F16S3G1

3 名成员

创作了10篇指南

uh can you do one for the 2016 bop it