修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

Harman Kardon Onyx Studio 2 Control Board Replacement

简介

If the buttons on your device aren't working, it may be time to replace your control board. Follow this guide to do so.

你所需要的

  1. Harman Kardon Onyx Studio 2 Control Board Replacement, Front Panel: 步骤 1 中的图像 1，3 Harman Kardon Onyx Studio 2 Control Board Replacement, Front Panel: 步骤 1 中的图像 2，3 Harman Kardon Onyx Studio 2 Control Board Replacement, Front Panel: 步骤 1 中的图像 3，3

    • Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.

    翻译

  2. Harman Kardon Onyx Studio 2 Control Board Replacement: 步骤 2 中的图像 1，2 Harman Kardon Onyx Studio 2 Control Board Replacement: 步骤 2 中的图像 2，2

    • Remove the five 14.4 mm T10 Torx screws.

    翻译

  3. Harman Kardon Onyx Studio 2 Control Board Replacement: 步骤 3 中的图像 1，1

    • Gently pull the front apart from the back.

    翻译

  5. Harman Kardon Onyx Studio 2 Control Board Replacement: 步骤 4 中的图像 1，2 Harman Kardon Onyx Studio 2 Control Board Replacement: 步骤 4 中的图像 2，2

    • Remove the four wires connecting the front and back panels.

    • Pinch the connector tab and pull gently upwards.

    • Repeat for the other three connectors.

    翻译

  6. Harman Kardon Onyx Studio 2 Control Board Replacement, Control Board: 步骤 5 中的图像 1，1

    • Pull the silicone button band off of the outer edge of the speaker.

    翻译

  7. Harman Kardon Onyx Studio 2 Control Board Replacement: 步骤 6 中的图像 1，2 Harman Kardon Onyx Studio 2 Control Board Replacement: 步骤 6 中的图像 2，2

    • Disconnect the two pressure connections from the circuit board.

    翻译

  8. Harman Kardon Onyx Studio 2 Control Board Replacement: 步骤 7 中的图像 1，2 Harman Kardon Onyx Studio 2 Control Board Replacement: 步骤 7 中的图像 2，2

    • Gently remove the control board band by placing fingers in contact with it through the button openings.

    • Work from the outer edges in so as not to bend the band.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与1其他贡献者

Alexandra Achtenberg

于02/02/17注册

2,031 声望

创作了6篇指南

徽章: 16

+ 13更多徽章

团队

USF Tampa, Team 16-5, Blackwell Spring 2017 USF Tampa, Team 16-5, Blackwell Spring 2017 的会员

USFT-BLACKWELL-S17S16G5

3 名成员

创作了24篇指南

9条评论

Do you guys know where to get a control board, because my board is broken so i am looking for one

Zhou Yuqi - 回复

Where to get control board onyx 2.

Mike Champagne - 回复

My on/off button keeps blinking…..would somebody please email me cause I am a techno nitwit……..i’m gonna bring this piece of non chargeable crap outside and go Italian on it with the 12 gauge! SERENITY NOW!

Sincerely,

email ; jorcal3318@aol.com

Frank Vitolo - 回复

power button continually blinks. Won’t turn on, can’t pair, no other action can be taken, just the blinking power button. what’s the solution? Please share….

rachael friesen -

Speaker plays for split second then fades away like wtf

Paul Berrellez - 回复

添加评论

浏览统计数据:

过去 24 小时： 7

过去 7 天： 29

过去 30 天： 91

总计 14,170