跳转到主内容

简介

If the buttons on your device aren't working, it may be time to replace your control board. Follow this guide to do so.

  1. Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device. Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device. Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.
    • Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.

  2. Remove the five 14.4 mm T10 Torx screws. Remove the five 14.4 mm T10 Torx screws.
    • Remove the five 14.4 mm T10 Torx screws.

  3. Gently pull the front apart from the back.
    • Gently pull the front apart from the back.

  4. Remove the four wires connecting the front and back panels. Pinch the connector tab and pull gently upwards.
    • Remove the four wires connecting the front and back panels.

    • Pinch the connector tab and pull gently upwards.

    • Repeat for the other three connectors.

  5. Pull the silicone button band off of the outer edge of the speaker.
    • Pull the silicone button band off of the outer edge of the speaker.

  6. Disconnect the two pressure connections from the circuit board. Disconnect the two pressure connections from the circuit board.
    • Disconnect the two pressure connections from the circuit board.

  7. Gently remove the control board band by placing fingers in contact with it through the button openings. Work from the outer edges in so as not to bend the band.
    • Gently remove the control board band by placing fingers in contact with it through the button openings.

    • Work from the outer edges in so as not to bend the band.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Alexandra Achtenberg

于2017年02月02日注册

1,701 信誉积分

创作了6篇指南

团队

USF Tampa, Team 16-5, Blackwell Spring 2017 USF Tampa, Team 16-5, Blackwell Spring 2017 的会员

USFT-BLACKWELL-S17S16G5

3 名成员

创作了24篇指南

7条评论

Do you guys know where to get a control board, because my board is broken so i am looking for one

Zhou Yuqi - 回复

Where to get control board onyx 2.

Mike Champagne - 回复

My on/off button keeps blinking…..would somebody please email me cause I am a techno nitwit……..i’m gonna bring this piece of non chargeable crap outside and go Italian on it with the 12 gauge! SERENITY NOW!

Sincerely,

email ; jorcal3318@aol.com

Frank Vitolo - 回复

power button continually blinks. Won’t turn on, can’t pair, no other action can be taken, just the blinking power button. what’s the solution? Please share….

rachael friesen -

Speaker plays for split second then fades away like wtf

Paul Berrellez - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 10

过去的30天: 81

总计 11,517