修复你的物品 社区 商店

Harman Kardon Onyx Studio 2 Circuit Board Replacement

简介

If you have looked at the troubleshooting page and identified that your issues with your Onyx Studio 2 are indeed due to the circuit board being bad, this guide will walk you through how to replace it.

你所需要的

  1. Harman Kardon Onyx Studio 2 Circuit Board Replacement, Front Panel: 步骤 1 中的图像 1，3 Harman Kardon Onyx Studio 2 Circuit Board Replacement, Front Panel: 步骤 1 中的图像 2，3 Harman Kardon Onyx Studio 2 Circuit Board Replacement, Front Panel: 步骤 1 中的图像 3，3

    • Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.

    编辑

  2. Harman Kardon Onyx Studio 2 Circuit Board Replacement: 步骤 2 中的图像 1，2 Harman Kardon Onyx Studio 2 Circuit Board Replacement: 步骤 2 中的图像 2，2

    • Remove the five 14.4 mm T10 Torx screws.

    编辑

  3. Harman Kardon Onyx Studio 2 Circuit Board Replacement: 步骤 3 中的图像 1，1

    • Gently pull the front apart from the back.

    编辑

  5. Harman Kardon Onyx Studio 2 Circuit Board Replacement: 步骤 4 中的图像 1，2 Harman Kardon Onyx Studio 2 Circuit Board Replacement: 步骤 4 中的图像 2，2

    • Remove the four wires connecting the front and back panels.

    • Pinch the connector tab and pull gently upwards.

    • Repeat for the other three connectors.

    编辑

  6. Harman Kardon Onyx Studio 2 Circuit Board Replacement, Control Board: 步骤 5 中的图像 1，1

    • Pull the silicone button band off of the outer edge of the speaker.

    编辑

  7. Harman Kardon Onyx Studio 2 Circuit Board Replacement: 步骤 6 中的图像 1，2 Harman Kardon Onyx Studio 2 Circuit Board Replacement: 步骤 6 中的图像 2，2

    • Disconnect the two pressure connections from the circuit board.

    编辑

  8. Harman Kardon Onyx Studio 2 Circuit Board Replacement: 步骤 7 中的图像 1，2 Harman Kardon Onyx Studio 2 Circuit Board Replacement: 步骤 7 中的图像 2，2

    • Gently remove the control board band by placing fingers in contact with it through the button openings.

    • Work from the outer edges in so as not to bend the band.

    编辑

  9. Harman Kardon Onyx Studio 2 Circuit Board Replacement, Circuit Board: 步骤 8 中的图像 1，2 Harman Kardon Onyx Studio 2 Circuit Board Replacement, Circuit Board: 步骤 8 中的图像 2，2

    • Disconnect the remaining connectors from the circuit board.

    • Disconnect the Bluetooth antenna.

    编辑

  10. Harman Kardon Onyx Studio 2 Circuit Board Replacement: 步骤 9 中的图像 1，2 Harman Kardon Onyx Studio 2 Circuit Board Replacement: 步骤 9 中的图像 2，2

    • Remove the four 10 mm T10 Torx screws.

    • Pull the circuit board out of the device as it is now free.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

11等其他人完成本指南。

作者

与3其他贡献者

Alexandra Achtenberg

于02/02/17注册

2,031 声望

创作了6篇指南

徽章: 16

+ 13更多徽章

团队

USF Tampa, Team 16-5, Blackwell Spring 2017 USF Tampa, Team 16-5, Blackwell Spring 2017 的会员

USFT-BLACKWELL-S17S16G5

3 名成员

创作了24篇指南

5条评论

Where do I get another one

Adrian tlahuel - 回复

Where we buy the board?

Eric Therrien - 回复

Umm… this was rather anticlimactic. Last step was basically like “and now contemplate your life choices”.

markcendan - 回复

Where can I Buy a new hk onix studio Main board?

tecnologia en localizaciòn - 回复

My speaker was working great. I just disconnected my phone to make a call, put YouTube back on it was all mumbled & the big button in the back kept pulsing so fast.

Maureen Field - 回复

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 18

过去 30 天： 122

总计 21,498