跳转到主内容

修复你的物品

维修的权力

商店

简介

After completing the prerequisite guide for taking apart the front panel of the speaker, you can then access the battery and replace it when it is dying or not working.

  1. Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device. Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device. Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.
    • Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.

  2. Remove the five 14.4 mm T10 Torx screws. Remove the five 14.4 mm T10 Torx screws.
    • Remove the five 14.4 mm T10 Torx screws.

  3. Gently pull the front apart from the back.
    • Gently pull the front apart from the back.

  4. Remove the four wires connecting the front and back panels. Pinch the connector tab and pull gently upwards.
    • Remove the four wires connecting the front and back panels.

    • Pinch the connector tab and pull gently upwards.

    • Repeat for the other three connectors.

  5. Begin by removing the three 10.4 mm T10 Torx screws from the battery cover. Remove battery cover. Pull battery out to replace.
    • Begin by removing the three 10.4 mm T10 Torx screws from the battery cover.

    • Remove battery cover.

    • Pull battery out to replace.

结论

To reassemble your device, follow these instructions in reverse order.

28等其他人完成本指南。

Alexandra Achtenberg

于2017年02月02日注册

1,547 信誉积分

创作了6篇指南

团队

USF Tampa, Team 16-5, Blackwell Spring 2017 USF Tampa, Team 16-5, Blackwell Spring 2017 的会员

USFT-BLACKWELL-S17S16G5

3 名成员

创作了19篇指南

Thanks for the step by step instructions. I have tried replacing the batteries but the speaker still won't turned on. I believe the battery cable/module is broken, do you know how to fix it? Thanks.

Wompy Pratomo - 回复

Can you put a step by step instruction how to replace a battery on a Harman/ Kardon esquire 2?

Bullet Magnet - 回复

Hello, what kind of battery is good for replacement? I'm thinking of using LG 3000mAh or Panasonic 3400 mAh (both unprotected) and making a direct swap. Help please

marcel - 回复

Can you tell me what kind of the hk onyx speaker battery's, if you can show me step instructions to replace! Thankyou!

happymandm8 - 回复

This worked great. Thanks. Battery would not charge. Bought a replacement on Ebay and now it works as if new.

JSM - 回复

添加评论

浏览统计数据:

过去的24小时: 22

过去的7天: 180

过去的30天: 867

总计 55,107