跳转到主内容

Hannspree SN12E2 RAM Replacement

你所需要的

  1. Hannspree SN12E2 RAM Replacement, Battery: 步骤 1 中的图像 1,1
    • Unplug and power off your laptop.

  2. Hannspree SN12E2 RAM Replacement: 步骤 2 中的图像 1,1
    • Close your laptop .

    • Place your laptop face down on a flat surface.

  3. Hannspree SN12E2 RAM Replacement: 步骤 3 中的图像 1,3 Hannspree SN12E2 RAM Replacement: 步骤 3 中的图像 2,3 Hannspree SN12E2 RAM Replacement: 步骤 3 中的图像 3,3
    • Unlatch the lock on the top right of your laptop first.

    • You will need to pull on the lock on the left side and remove the battery at the same time

    • The left lock is a spring lock and needs constant pressure applied in order to stay open.

  4. Hannspree SN12E2 RAM Replacement, RAM: 步骤 4 中的图像 1,2 Hannspree SN12E2 RAM Replacement, RAM: 步骤 4 中的图像 2,2
    • Remove the RAM access door.

    • Remove the two 3mm screws using a Phillips #0 screwdriver.

    • Gently lift on the door out of place.

    • When replacing the door it should click into place. Ensure the alignment tabs are correctly seated and gently push until it clicks into place.

  5. Hannspree SN12E2 RAM Replacement: 步骤 5 中的图像 1,3 Hannspree SN12E2 RAM Replacement: 步骤 5 中的图像 2,3 Hannspree SN12E2 RAM Replacement: 步骤 5 中的图像 3,3
    • Gently push outward on the two retaining clips, being careful not to damage the motherboard.

    • Lift up on the RAM until it makes a 35 degree angle with the board.

    • Remove the RAM by pulling away from the housing at 35 degrees.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Tim Chase

于03/25/19注册

360 声望

创作了3篇指南

团队

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 6

总计 262