修复你的物品 社区 商店

Hannspree Hannspad SN1AT71 Back Panel Replacement

简介

The Hannspad has a deceptive back panel that will not separate. Don't lose hope. This is not the real back panel, it is just there for aesthetics. The actual way to take the back panel off is at the seam around the edge of the screen. Follow these steps to protect your screen and easily take the back panel off your Hannspad.

你所需要的

  1. Hannspree Hannspad SN1AT71 Back Panel Replacement, Back Panel: 步骤 1 中的图像 1，1

    • Place the tablet screen side up.

    • Make sure the device is turned off to avoid damage.

    编辑

  2. Hannspree Hannspad SN1AT71 Back Panel Replacement: 步骤 2 中的图像 1，2 Hannspree Hannspad SN1AT71 Back Panel Replacement: 步骤 2 中的图像 2，2

    • Use the metal spudger to press an opening between the screen and back cover.

    • The plastic tabs are located on each corner of the back cover.

    • Be careful, as the plastic tabs are delicate.

    编辑

  4. Hannspree Hannspad SN1AT71 Back Panel Replacement: 步骤 3 中的图像 1，1

    • Wedge the plastic opening tool between the screen and the back panel to prevent re-engagement

    编辑

  5. Hannspree Hannspad SN1AT71 Back Panel Replacement: 步骤 4 中的图像 1，2 Hannspree Hannspad SN1AT71 Back Panel Replacement: 步骤 4 中的图像 2，2

    • Slide the metal spudger around the casing to separate it from the inside of the tablet.

    编辑

  6. Hannspree Hannspad SN1AT71 Back Panel Replacement: 步骤 5 中的图像 1，2 Hannspree Hannspad SN1AT71 Back Panel Replacement: 步骤 5 中的图像 2，2

    • Flip the tablet over so the screen side is down after all the tabs are separated.

    • Remove the back panel by delicately lifting it straight up.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与9其他贡献者

matthew vandeventer

于03/11/15注册

950 声望

创作了5篇指南

徽章: 20

+ 17更多徽章

团队

Colorado Springs, Team 9-4, Panko Spring 2015 Colorado Springs, Team 9-4, Panko Spring 2015 的会员

UCCS-PANKO-S15S9G4

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 17

总计 2,371