修复你的物品 社区 商店

Handset Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

简介

Prerequisite Only

你所需要的

  1. Handset Replacement, Battery: 步骤 1 中的图像 1，2 Handset Replacement, Battery: 步骤 1 中的图像 2，2

    • Remove the battery cover by placing your thumb on the cover and gently push towards the base of the phone.

    编辑

  2. Handset Replacement: 步骤 2 中的图像 1，1

    • Remove the rechargeable battery pack (BP-T18) by pressing down on the power cable connector and pulling at the same time.

    编辑

  4. Handset Replacement, Handset: 步骤 3 中的图像 1，1

    • After removing the BP-T18 battery pack, you will see two 11mm Phillips #0 screws located at the bottom of the phone. Remove both screws with a screwdriver.

    • Product is made of brittle plastic.

    编辑

  5. Handset Replacement: 步骤 4 中的图像 1，2 Handset Replacement: 步骤 4 中的图像 2，2

    • Locate an easy point of access for a spudger, and then slowly insert it into the gap and pry it open.

    • The opening should become bigger if you exert force at a 30 degrees angle.

    • Increase the degree of slant until the back cover is completely removed.

    编辑

  6. Handset Replacement: 步骤 5 中的图像 1，2 Handset Replacement: 步骤 5 中的图像 2，2

    • After removing the back cover, you will see 3 screws: one 7mm Phillips #0 screw at the top and two 11mm Phillips #0 screws at the bottom.

    • Use a screwdriver to remove all 3 screws.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Caleb Thomas

于09/29/16注册

161 声望

创作了2篇指南

徽章: 3

团队

IUPUI, Team 3-3, Harley Fall 2016 IUPUI, Team 3-3, Harley Fall 2016 的会员

IUPUI-HARLEY-F16S3G3

4 名成员

创作了17篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 50