Hamilton Beach 64650 Mixer Release Button Replacement

简介

This page will guide you through the replacement of the mixer release button on your Hamilton Beach Classic Stand Mixer 64650. This piece may break easily from normal use and it is important to remain in working order to make sure that the mixer's handle stays secured on the top of the stand.

你所需要的

步骤 1 Mixer Release Button

Hamilton Beach 64650 Mixer Release Button Replacement, Mixer Release Button: 步骤 1 中的图像 1，3

Hamilton Beach 64650 Mixer Release Button Replacement, Mixer Release Button: 步骤 1 中的图像 2，3

Hamilton Beach 64650 Mixer Release Button Replacement, Mixer Release Button: 步骤 1 中的图像 3，3

Depress mixer release button fully and lift mixer off of the platform.
Remove the bowl from the stand.

编辑

步骤 2

Hamilton Beach 64650 Mixer Release Button Replacement: 步骤 2 中的图像 3，3

Remove and set aside the three 1.3 mm Philips #2 screws holding the plastic cover in place.

编辑

步骤 3

Shift the cover to allow the plastic retaining hook to fit through the hole easily.
Lift the cover away.

编辑

步骤 4

Hamilton Beach 64650 Mixer Release Button Replacement: 步骤 4 中的图像 3，3

Fully depress the mixer release button, pushing it through the mounting hole.
Push the button slightly upwards once it is inside the stand to access the spring underneath it.
Carefully remove the button from the stand while leaving spring in place.