Hamilton Beach 51101BA Power Cord Replacement

简介

In this guide you are going to learn how to take out the current power cord in order to replace it with a new one.

你所需要的

步骤 1 Power Cord

Hamilton Beach 51101BA Power Cord Replacement, Power Cord: 步骤 1 中的图像 1，3

Hamilton Beach 51101BA Power Cord Replacement, Power Cord: 步骤 1 中的图像 2，3

Hamilton Beach 51101BA Power Cord Replacement, Power Cord: 步骤 1 中的图像 3，3

Remove container from base.
Hold the blender and the container, then twist the container in a clockwise motion.
Make sure to follow the lock and unlock markings on the container.

编辑

步骤 2

Turn the blender so the bottom is facing you.
Using a Phillips #2 screwdriver, remove the two 5 mm Phillips screws from the base.

编辑

步骤 3

Lift the two wires from the motor platform.

编辑

步骤 4

Using the wire cutters, cut the end of the thick black wires.

编辑

结论

To reassemble your device, you must solder the new power cord to the thin black and thin gray wires, and follow the steps in reverse order. Requires soldering skills.

另外一个人完成了本指南。