Skip to main content

配件

没有特定配件。

  1. Identify the black air concentrating nozzle.
    • Identify the black air concentrating nozzle.

  2. Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.
    • Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

  3. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  4. Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.
    • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

    • The purpose of this guide is to demonstrate the repair steps for a generic hair dryer. We do not specify screw sizes because screw sizes can differ between hair dryers. For most hair dryers, use a Phillips #1 Screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 Screwdriver.

  5. Detach the hair dryer grating from the body by gently twisting the grating from side to side.
    • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

  6. Separate the hair dryer grating into the three pieces seen in the image.
    • Separate the hair dryer grating into the three pieces seen in the image.

结论

To reassemble your device, follow these instructions in reverse order.

Mitch

于2012年10月04日注册

31 Reputation

创作了5篇指南

Team

Cal Poly, Team 24-29, Regan Fall 2012 Cal Poly, Team 24-29, Regan Fall 2012 的会员

CPSU-REGAN-F12S24G29

5 名成员

创作了6篇指南

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 11

All Time: 1,678