跳转到主内容

简介

How to replace the battery on HTC 8S.


视频概述

  1. Switch off the phone. Remove the SIM / memory card cover. Remove any SIM and memory cards.
    • Switch off the phone.

    • Remove the SIM / memory card cover.

    • Remove any SIM and memory cards.

    • Use screwdriver torx T5 and unscrew the two screws at the bottom of the battery / back cover.

  2. Use a plastic tool and slowly separate the back cover. The loudspeaker is inside on the back cover. The loudspeaker is inside on the back cover.
    • Use a plastic tool and slowly separate the back cover.

    • The loudspeaker is inside on the back cover.

  3. Use a Phillips #0 screwdriver and remove the 4x silver screws. With a plastic tool carefully separate the battery from the logic board. With a plastic tool carefully separate the battery from the logic board.
    • Use a Phillips #0 screwdriver and remove the 4x silver screws.

    • With a plastic tool carefully separate the battery from the logic board.

  4. The battery connector is under the middle frame. Remove it and disconnect the battery. Model: BM59100 / 3,8VDC / 1700mAh Model: BM59100 / 3,8VDC / 1700mAh
    • The battery connector is under the middle frame. Remove it and disconnect the battery.

    • Model: BM59100 / 3,8VDC / 1700mAh

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

ZFix

于2013年12月09日注册

178,375 信誉积分

创作了315篇指南

团队

Master Techs Master Techs 的会员

Community

297 名成员

创作了982篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 4

总计 3,054