Take the back cover off the phone and take the battery out.
Take a SL#2.5 screwdriver and pop the black piece off shown here.
Take a T5 screwdriver and unscrew the two screws seen here
Unscrew the two screws on the back of the phone with a T5 screwdriver
Take the SL#2.5 screwdriver and pry off the back cover
The phone should now look like the second picture
Next lift up the camera lens from the board.
Then pry off the circuit circled in red on the second picture
Take the SL#2.5 screwdriver and pry off the volume buttons on the side of the phone
The circuit board should now be detached from the LCD part of the phone
Next take the SL#2.5 screwdriver and pry the grey fabric sticker off on the LCD side of the phone
Next take the SL#2.5 screwdriver and pry the screen from the front plastic cover
The screen should come out with ease and be completely detached from the rest of the cover.
Replace screen with a new one.
To reassemble your device, follow these instructions in reverse order.
取消:我没有完成这个指南。
与9其他贡献者
于10/04/11注册
16 声望
撰写一个指南
徽章: 3
UWSTOUT-ZHOU-F11S5G3
4 名成员
创作了6篇指南
选择一个尺寸并复制下面的代码,将本指南作为一个小插件嵌入到你的网站/论坛中。
过去 24 小时: 1
过去 7 天: 3
过去 30 天: 8
总计 1,529