配件

无需配件。

  1. Take the back cover off the phone and take the battery out.
    • Take the back cover off the phone and take the battery out.

    添加评论

  2. Take a SL#2.5 screwdriver and pop the black piece off shown here
    • Take a SL#2.5 screwdriver and pop the black piece off shown here

    添加评论

    • Take a T5 screwdriver and unscrew the two screws seen here

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Unscrew the two screws on the back of the phone with a T5 screwdriver

    添加评论

    • Take the SL#2.5 screwdriver and pry off the back cover

    • The phone should now look like the second picture

    添加评论

    • Take the SL#2.5 screwdriver and lift up the white connector at the top right corner of the phone on the side with the circuit board

    添加评论

    • Next lift up the camera lens from the board.

    • It should now look like the second picture

    • Then lift up the circuit circled in red on the second picture

    添加评论

    • Take the SL#2.5 screwdriver and pry off the volume buttons on the side of the phone

    • The circuit board should now be detached from the LCD part of the phone

    添加评论

    • Next take the SL#2.5 screwdriver and pry the buttons off the phone and replace with the new ones

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Caitlin Bruce

于2011年10月04日注册

23 信誉积分

撰写一个指南

团队

UW Stout, Team 5-3, Zhou Fall 2011 UW Stout, Team 5-3, Zhou Fall 2011 的会员

UWSTOUT-ZHOU-F11S5G3

4 名成员

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 723