HTC Vive Facerest Replacement

简介

Use this guide to remove and replace the facerest on an HTC Vive.

你所需要的

步骤 1 Unscrew the head strap mounts

HTC Vive Facerest Replacement, Unscrew the head strap mounts: 步骤 1 中的图像 1，2

HTC Vive Facerest Replacement, Unscrew the head strap mounts: 步骤 1 中的图像 2，2

Be sure to power down and disconnect your Vive before beginning.
Use a T5 Torx driver to remove the two 12 mm-long screws securing the head strap mounts on either side of the headset.
For some devices, a T6 Torx driver may work better.
The mounts may fall off when the screws are removed, so be careful not to lose any parts.

编辑

步骤 2 Remove the head strap mounts

HTC Vive Facerest Replacement, Remove the head strap mounts: 步骤 2 中的图像 1，3

HTC Vive Facerest Replacement, Remove the head strap mounts: 步骤 2 中的图像 2，3

HTC Vive Facerest Replacement, Remove the head strap mounts: 步骤 2 中的图像 3，3

Remove both head strap mounts.

编辑

步骤 3 Remove the facerest

HTC Vive Facerest Replacement, Remove the facerest: 步骤 3 中的图像 1，2

HTC Vive Facerest Replacement, Remove the facerest: 步骤 3 中的图像 2，2

Slide the facerest straight away from the headset to remove it.

编辑

结论

Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Answers community for troubleshooting help.

4等其他人完成本指南。