修复你的物品 社区 商店

HTC Touch Pro 2 Housing Replacement

你所需要的

  1. HTC Touch Pro 2 Housing Replacement, Battery: 步骤 1 中的图像 1，3 HTC Touch Pro 2 Housing Replacement, Battery: 步骤 1 中的图像 2，3 HTC Touch Pro 2 Housing Replacement, Battery: 步骤 1 中的图像 3，3

    • Apply pressure and slide upward to remove back cover.

    • Lift the back cover up away from the phone.

    编辑

  2. HTC Touch Pro 2 Housing Replacement: 步骤 2 中的图像 1，2 HTC Touch Pro 2 Housing Replacement: 步骤 2 中的图像 2，2

    • Lift battery upward on the upper right-hand side to remove it.

    • Check the battery to make sure there's no bent corners

    编辑

  4. HTC Touch Pro 2 Housing Replacement, Housing: 步骤 3 中的图像 1，2 HTC Touch Pro 2 Housing Replacement, Housing: 步骤 3 中的图像 2，2

    • Using a T5 screwdriver, remove the four screws in corners as shown.

    • Lift the top portion of the rear case.

    • There is a ribbon attached on the back of this part that requires caution to remove.

    编辑

  5. HTC Touch Pro 2 Housing Replacement: 步骤 4 中的图像 1，3 HTC Touch Pro 2 Housing Replacement: 步骤 4 中的图像 2，3 HTC Touch Pro 2 Housing Replacement: 步骤 4 中的图像 3，3

    • Using an IfixIt Plastic Tool, detach the plastic casing from the keyboard. This may require some force.

    • Using a spudger or other thin tool, carefully pry up ZIF connectors as shown. This will allow the black ribbons to detach from the keyboard.

    • Slide the two parts away from each other so that the black ribbons slide through the slots and you will now have housing into two parts.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与11其他贡献者

Melinda Phan

于04/17/11注册

438 声望

创作了9篇指南

徽章: 12

+ 9更多徽章

团队

Cal Poly, Team 9-64, Walters Spring 2011 Cal Poly, Team 9-64, Walters Spring 2011 的会员

CPSU-WALTERS-S11S9G64

5 名成员

创作了18篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 1

总计 3,878