简介

This guide will lead the user through the process of disassembling their smart phone in order to remove the broken speaker. In just a few short, easy to follow steps this goal can be accomplished with little knowledge and only a few basic tools.

First, flip the phone over so that the back is facing you.
  • First, flip the phone over so that the back is facing you.

添加评论

Next, using both thumbs, carefully push the back side of the phone's exterior up, removing it from the main section of the phone. Set this piece aside until you need to   reassemble the phone.
  • Next, using both thumbs, carefully push the back side of the phone's exterior up, removing it from the main section of the phone.

  • Set this piece aside until you need to reassemble the phone.

添加评论

Insert thumb and pointer finger into the notch above the battery. Pull the battery away from the rest of the phone and set it aside. Insert thumb and pointer finger into the notch above the battery. Pull the battery away from the rest of the phone and set it aside.
  • Insert thumb and pointer finger into the notch above the battery. Pull the battery away from the rest of the phone and set it aside.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Next, choose the matching tool from your driver kit and remove the six screws found around the perimeter of the phone. Once the screws are removed make sure to keep them in a safe place for reassembly.
  • Next, choose the matching tool from your driver kit and remove the six screws found around the perimeter of the phone.

    • Once the screws are removed make sure to keep them in a safe place for reassembly.

添加评论

Carefully pull off the back casing. This can be difficult. Start by slowly pulling the back part from the front shell. As it starts to lift up, continue moving around the phone until it is in two separate pieces.
  • Carefully pull off the back casing.

  • This can be difficult. Start by slowly pulling the back part from the front shell. As it starts to lift up, continue moving around the phone until it is in two separate pieces.

添加评论

Next, remove the top screw.
  • Next, remove the top screw.

  • Be careful! The LCD screen is still attached to the front of the motherboard by a flexible ribbon cable.

添加评论

Flip over the motherboard so that the front case is visible. Using a spudger, remove the speaker out of its holding cell. Flip over the motherboard so that the front case is visible. Using a spudger, remove the speaker out of its holding cell.
  • Flip over the motherboard so that the front case is visible. Using a spudger, remove the speaker out of its holding cell.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Luke Plewa

于2011年04月22日注册

120 信誉积分

创作了4篇指南

团队

Cal Poly, Team 25-29, Garner Spring 2011 Cal Poly, Team 25-29, Garner Spring 2011 的会员

CPSU-GARNER-S11S25G29

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,590