配件

无需配件。

Flip the phone over to have the rear cover facing up.
  • Flip the phone over to have the rear cover facing up.

    • The camera lens should be towards the top of the phone.

添加评论

Slide the cover up, towards the top of phone, to unlock the battery cover.
  • Slide the cover up, towards the top of phone, to unlock the battery cover.

  • Lift the cover off phone and remove it.

添加评论

  • Use your finger to push the top of the battery downwards and lift the battery out of the phone.

添加评论

  • Remove the six Torx #5 screws that are securing the rear frame.

添加评论

  • Pry the frame open, releasing the eight plastic tabs around the edge of the frame, using the plastic opening tool.

    • A plastic card can be used instead of the plastic opening tool.

添加评论

  • Remove the single Phillips #0 screw that is securing the motherboard to the front case of the phone.

添加评论

  • Pry the motherboard away from the front of the plastic case using a plastic opening tool.

    • Be careful not to break the ribbon cable when prying away the motherboard.

添加评论

  • Remove the plastic cover from the LCD display and the motherboard.

    • The Motherboard and the LCD are still attached together.

添加评论

  • Remove the gray tape securing the ribbon cable.

添加评论

  • Remove the yellow tape securing the connector lock.

添加评论

  • Carefully lift the black lock to release the ribbon cable, using the plastic opening tool.

添加评论

  • Pull the ribbon cable upwards, disconnecting it from the Motherboard.

添加评论

  • Lift the Motherboard away from the LCD display.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Marco Jokada

于2011年04月28日注册

247 信誉积分

创作了6篇指南

团队

CSU Los Angeles, Team 1-2, Nelson Spring 2011 CSU Los Angeles, Team 1-2, Nelson Spring 2011 的会员

CSULA-NELSON-S11S1G2

5 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 2,009