修复你的物品 社区 商店

HTC One X Plus Screen Replacement

简介

You may need to replace your screen if it is broken or cracked.

你所需要的

  1. HTC One X Plus Screen Replacement, Screen: 步骤 1 中的图像 1，1

    • Power off your device.

    • Insert a pin, paper clip, or very small piece of metal in the hole next to the micro sim card holder to remove it.

    • The sim card slot is located on the top edge of the device.

    编辑

  2. HTC One X Plus Screen Replacement: 步骤 2 中的图像 1，3 HTC One X Plus Screen Replacement: 步骤 2 中的图像 2，3 HTC One X Plus Screen Replacement: 步骤 2 中的图像 3，3

    • Using plastic opening tools, pry open the bottom of the device first.

    • You will hear clicking sounds as the sides of the device detach from the screen.

    • Once both sides are detached, use the suction cup tool to remove the screen completely from the black encasing.

    编辑

  3. HTC One X Plus Screen Replacement: 步骤 3 中的图像 1，3 HTC One X Plus Screen Replacement: 步骤 3 中的图像 2，3 HTC One X Plus Screen Replacement: 步骤 3 中的图像 3，3

    • Remove the five 2.4 mm screws using a Phillips #000 screwdriver.

    • Remove the plastic cover.

    编辑

  5. HTC One X Plus Screen Replacement: 步骤 4 中的图像 1，3 HTC One X Plus Screen Replacement: 步骤 4 中的图像 2，3 HTC One X Plus Screen Replacement: 步骤 4 中的图像 3，3

    • Use a Phillips #000 screwdriver to remove the two 3.4 mm screws.

    • Remove the PCB board and antenna.

    编辑

  6. HTC One X Plus Screen Replacement: 步骤 5 中的图像 1，2 HTC One X Plus Screen Replacement: 步骤 5 中的图像 2，2

    • Use tweezers to disconnect the power button flex cable.

    编辑

  7. HTC One X Plus Screen Replacement: 步骤 6 中的图像 1，3 HTC One X Plus Screen Replacement: 步骤 6 中的图像 2，3 HTC One X Plus Screen Replacement: 步骤 6 中的图像 3，3

    • Disconnect the battery's six pin connector from the motherboard.

    • Remove the battery by pulling it upwards.

    编辑

  8. HTC One X Plus Screen Replacement: 步骤 7 中的图像 1，1

    • Disconnect the screen from the digitizer.

    • Use a plastic opening tool to gently disconnect the screen from the digitizer.

    • You may have to use heat to loosen adhesive securing the screen.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Jason Melo

于08/26/15注册

483 声望

创作了4篇指南

徽章: 11

+ 8更多徽章

团队

USF Tampa, Team 3-3, Eyestone Fall 2015 USF Tampa, Team 3-3, Eyestone Fall 2015 的会员

USFT-EYESTONE-F15S3G3

3 名成员

创作了10篇指南

一条评论

Man, this did nothing but break my International One X+. There were so many instructions missing.

Garrett Reyman - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 5

总计 1,841