跳转到主内容
  1. Use an iOpener or hair dryer to apply heat to the lower speaker grille, in order to soften the adhesive underneath.
    • Use an iOpener or hair dryer to apply heat to the lower speaker grille, in order to soften the adhesive underneath.

  2. Slide a thin pry tool underneath the lower speaker cover and slide it across to separate the adhesive underneath.
    • Slide a thin pry tool underneath the lower speaker cover and slide it across to separate the adhesive underneath.

    • Remove the lower speaker cover.

  3. Remove the screw under the speaker cover using a T6 Torx screwdriver. Remove the screw under the speaker cover using a T6 Torx screwdriver. Remove the screw under the speaker cover using a T6 Torx screwdriver.
    • Remove the screw under the speaker cover using a T6 Torx screwdriver.

  4. Slide a thin guitar pick or pry tool between the edge of the display and the rear case, near the bottom of the phone. Carefully work your way up each side of the display and separate the rear case. There are three clips on each side. Carefully work your way up each side of the display and separate the rear case. There are three clips on each side.
    • Slide a thin guitar pick or pry tool between the edge of the display and the rear case, near the bottom of the phone.

    • Carefully work your way up each side of the display and separate the rear case. There are three clips on each side.

  5. Remove the rear case from the phone. Remove the rear case from the phone.
    • Remove the rear case from the phone.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Chris Jose

于2014年09月22日注册

735 信誉积分

创作了2篇指南

团队

USF Tampa, Team 3-4, Brown Fall 2014 USF Tampa, Team 3-4, Brown Fall 2014 的会员

USFT-BROWN-F14S3G4

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 8

总计 6,677